Publish Time: 2023-03-05 Origin: Site
Marine Rubber Fender has the characteristics of good elasticity, high energy absorption, convenient maintenance, long service life, and easy mass production, and is widely used in Japan, Europe, America, and Southeast Asian countries. Marine Rubber Fender can not only protect the ship and the wharf but also reduce the horizontal load acting on the wharf, improve the berthing capacity of the wharf, Make new docks lighter, and reduce costs. So what are the common classifications of Marine Rubber Fender?
Here is the content list:
l Floating Marine Rubber Fender
l Cylindrical Marine Rubber Fender
l Semicircular (Type D) Marine Rubber Fender
l Drum-type Marine Rubber Fender
A floating cell fender is a new type of fender equipment. Compared with solid Marine Rubber Fender, its main features are large compression deformation, large energy absorption, small reaction force, self-floating, easy installation, etc. It is usually used in ship-to-ship (ship-to-ship), ship-to-wharf (ship-to-wharf) barges, berthing, and other occasions; due to its self-floating characteristics, it is also especially suitable for installation on wharves with large tidal changes. Among them, the filled Marine Rubber Fender is especially suitable for applications in harsh environments, such as offshore drilling platforms, due to its advantages of maintenance-free and long life.
This is a linear Marine Rubber Fender elastic body with a circular cross-section and adjustable length. It can be suspended and installed and is suitable for dock protection or two boats alongside. This kind of fender is characterized by low reaction force, small surface pressure, and reasonable energy absorption; when berthing, it has strong adaptability to ship roll and pitch and is not affected by the size of the vessel. It is widely used and easy to install and maintain, especially suitable for old-fashioned fenders. pier.
This is a linear Marine Rubber Fender elastic body with a cross-section in the shape of the English letter D and an adjustable length. It can be fixed or suspended. It is generally used for small ships, suitable for dock protection or two ships alongside. This kind of fender is characterized by moderate reaction force and higher energy absorption than the cylindrical type; it is easier to install and work; because of the small width of the bottom, it is especially suitable for the installation and use of frame-type docks and ship sides.
This is a rubber cylindrical fender elastomer with mounting flanges at both ends. It has the characteristics of a large compressible ratio, and a relatively stable structure and its performance is less affected by the compression angle. It can be installed with a steel structure anti-shock plate and sports a restrictive device. This kind of fender is characterized by low reaction force and large energy absorption; the surface pressure is below 25 tons/m2; the mechanical performance of inclined compression is small; Π-type Marine Rubber Fender: the characteristic is low reaction force, large energy absorption; easy installation; The industry standards generally suitable for solid Marine Rubber Fender in large and medium-sized wharves are "HG/T 2866-2016 Marine Rubber Fender", "GB/T 21537-2008 Conical Marine Rubber Fender".
If you are interested in Marine Rubber Fender, you can contact us. Our website is www.cmrqd.com. Welcome and look forward to working with you.