Publish Time: 2024-01-24 Origin: Site
The solid Marine Rubber Fender has high energy absorption and reaction force and has the advantages of low cost, long service life, simple installation, and maintenance, etc. Floating Marine Rubber Fender is a new type of Rubber Fender equipment. Compared with solid Marine Rubber Fender, its main features are large compression deformation, large energy absorption, small reaction force, self-floating, and easy installation. It is usually used in the ship-to-ship, ship-to-dock barge, berthing and other occasions; due to its self-floating characteristics, it is also especially suitable for installation in docks with large tidal changes. Among them, the filled Marine Rubber Fender is especially suitable for applications in harsh environments, such as offshore drilling platforms, due to its advantages of maintenance-free and long life.
Here is the content list:
Marine Rubber Fender is the most suitable anti-collision member
Marine Rubber Fender has an ideal collision avoidance posture
Cylinderical fender installation fixed points are the fewest among all types of Marine Rubber fenders, and it is an ideal anti-collision component to arrange on the pier in operation. The innovative structure of fastening Rubber Fender makes the construction process not damage the steel bars of the piles in the water or the internal structure of the pier. Since the pier is reasonably protected by the Marine Rubber Fender anti-collision device, the service life of the pier will also be extended. The mechanical properties of the cylindrical Marine Rubber Fender with a specification of 10000 can fully meet the safety requirements for the navigation of a 100-ton tourist ship. According to GB 50139-2004 listed in GB 50139-2004, the ship type width of 100-ton ships is 5.5 m, so no matter whether the hull collides with the pier in the direction of the bridge or along the direction of the bridge, it will touch more than two sets of cylindrical Marine Rubber Fenders, which shows its ability to resist ships. The impact is adequate.
The colorful cylindrical Marine Rubber Fender is selected as the main component of the pier anti-collision device, and its circumference is evenly arranged on the piles. Cylindrical Marine Rubber Fender has the following features. First of all, the cylindrical Marine Rubber Fender will recede when it is hit. At this time, although the force is small, the deformation will be large; because the Rubber Fender is round, every point it is hit is a tangent point, and the collision point can give the ship The first one weighs 780 kg, veneer (made of ultra-high molecular polyethylene), stainless steel bolts for veneer installation, pre-embedded bolts, and positioning plates. The anti-collision facility design is to use the positioning board to install the Marine Rubber Fender on the arc anti-collision fence, but there will be a phenomenon of tilting at both ends, and the Rubber Fender cannot be fastened. It must be processed with a curved support Rubber Fender base before installation. The Marine Rubber Fender is fastened to the arc anti-collision wall, but the lateral thrust of the connection between the base and the embedded sleeve makes the bow slide away, which is an ideal anti-collision posture.
If you are interested in Marine Rubber Fender, you can contact us. Our website is www.cmrqd.com. Welcome and look forward to cooperating with you.